Dependable Quality Gunsmithing Service...
"Thanks for your excellent service, It was so easy to get my repairs, and I got it back very quick!".
Don, NJ...
|
|
Feel free to call us direct at 800-847-0589 for fast friendly service.
Service Charges /
Clean & Oil /
Camouflage Service /
Metal Finishing /
Sight Work /
Barrel Work /
Action Work/
Rifle Work
Shotgun Work /
Muzzle Loader Work /
Handgun Work /
Stock Work
Service Charges
| Per Man Hour | $80.00 |
| Per Man & Machine Hour | $95.00 |
| Minimum Charge per Gun | $75.00 |
| Written Appraisals, Cost Estimates | $50.00 |
Back to the Top
Clean & Oil
| Consists of completely stripping gun, cleaning all parts, checking for wear, service suggestions.
| $100.00 |
Back to the Top
Camouflage
| Shotguns | |
| Basic Shot Gun | $295.00 |
| Over & Under Shotgun | $300.00 |
| Side by Side | $325.00 |
| Stock Only | $65.00 |
| Forearm Only | $45.00 |
| Barrel Only | $50.00 |
| Barrel Over & Under | $125.00 |
| Receiver Only | $95.00 |
| Synthetic Stock/Forearm ADD | $20.00 |
| Rifles | |
| Basic Rifle | $175.00 |
| Black Powder Rifle | $175.00 |
| Rifle Stock Only | $85.00 |
| Rifle Barrel Only | $70.00 |
| Synthetic Stocks ADD | $20.00 |
| Hand Guns | |
| Complete Pistol | $175.00 |
| Bows (Disassembled ONLY) | |
| Bow (Riser and Limbs) | $85.00 |
| Riser Only | $70.00 |
| Limbs Only | $65.00 |
| (No Warranty on Limb Pockets) | |
| Gun Assessories | |
| Shot Gun Mount | $25.00 |
| Scope Rings | $12.00 |
| Scope (at owners risk) | $45.00 |
| Choke Tubes | $12.00 |
| Extension Tubes | $25.00 |
| Bow Assessories | |
| Quiver(Top Only) | $35.00 |
| Cam or Wheels | $25.00 |
NOTE: Basic guns do not include Trigger Guards, Floor Plates, Bolts or Ram Rods. With the exception of Ram Rods, these items can be camoflauged at an addiional cost of $25.00 each. Rifle Bolts are camoflauged on the handle only. These items are not warranted.
Back to the Top
Metal Finishing
| Oxynate #7 Rebluing (abrasive,Bead-Wire) | $185.00 |
| Deluxe Oxynate #7 Rebluing (plus #240 & #400 grit polish) | |
| -Handgun (Deluxe Finish) | $200.00 |
| -Rifle Shotgun (Deluxe Finish) | $190.00 |
| Master Finish | |
| Handgun | $235.00 |
| Rifle/Shotgun | $250.00 |
| IM™ Belgian Bluing | |
| Handgun | $250.00 |
| Rifle/Shotgun | $275.00 |
| Slow Rust Bluing/Browning | $350.00 |
| Oxynate 84™ Bluing (stainless steel) | $85.00 |
| NitreBlue™ Bluing (sm. parts & access.) | $175.00 |
Baking Laquer Finish | $175.00 |
| Baking Teflon/Moly Finish | $175.00 |
| Bead: Sandblast or Wire brush | $125.00 |
| Electroless Nickle Plating | |
| -Handgun (or Small parts only) | |
| High Polish | $235.00 |
| Satin Polish | $200.00 |
| -Rifles/Shotguns | |
| High Polish | $250.00 |
| Satin Polish | $190.00 |
| Stripping Nickel | $150.00 |
| Parkerizing | $145.00 |
| Color Case Hardening | $450.00 |
| Metal Checkering | Hourly Rate |
| Engine Turning Bolt | Hourly Rate |
| Engine Turning Small Parts | Hourly Rate |
| Draw Filing | Hourly Rate |
Back to the Top
Sight Work
| Sight (Ammo, Targets, etc are not included) | $75.00 |
| Bore Sighting | $45.00 |
| Pattern Shotgun (Ammo, Targets, not incl.) | $75.00 |
| Drill and Tap Barrel or Receiver f/ Sights | $45.00 |
| Cut Dovetail in Barrel | $95.00 |
| Install Front Sight Ramp | |
| Sweat-on Type | $75.00 |
| Screw on Type | $60.00 |
| Band Type | Hourly Rate |
| Install Insert in Pistol Sight | $50.00 |
| Install Front/Mid-Rib Bead -Shotgun* | $45.00 |
| Plug hole and redrill for bead | $65.00 |
| Install Receiver Sights | |
| -Gun Drilled and Tapped | $45.00 |
| Scope Mounting | |
| -Gun Drilled and Tapped | $50.00 | |
* Plus cost of Sight.
Back to the Top
Back to the Top
General Barrel, Action and Rifle Work
| Check Headspace | $70.00 |
| Make Chamber Cast | $95.00 |
| Remove Stuck Fired Case from Camber | Hourly Rate |
| Remove Live Round from Camber | $150.00 + |
| Remove Obstruction from Bore | Hourly Rate |
| Remove Fouling from Barrel | Hourly + Materials |
| Lap Barrel | $130.00 |
| Install Liner in Barrel (Bluing not Incld.) | $225.00 |
| Cut and Crown Barrel | $95.00 |
| Chamber and Fit Barrel to Action | $250.00 + |
| Install Pre-threaded and Chambered Barrel | $150.00 |
| Lap in Bolt Lugs (setting/fitting not incld) | $75.00 |
| Welding on New Bolt Handle | $90.00 |
| Forging Bolt Handle | $115.00 |
| Make and Install Spring | Hourly Rate |
| Safeties, Installation | |
| Dakota, entry, Mod70 type w/shroud | $150 +finishing |
| MarkII, Buehler type | $70.00 |
| Chapman Safety Swing Lever | $135.00 |
| Triggers Installation or Adjustment | |
| Shilen, Timney, Dayton-Traister, Moyer | $90.00 |
| Double Set | $250.00 |
| Single Set | $140.00 |
| Install Muzzle Brake | $150.00 |
| Recontour Front or Rear Receiver Ring | $140.00 |
| Install Barrel Band Swivel | Hourly Rate |
Back to the Top
Shotgun Work
| Long Forcing Cone | |
| Non-plated bores, per barrel | $70.00 |
| Platedbores, per barrel | $100.00 |
| Resolder Rib (bluing not included) | Hourly Rate |
| Resolder Forend Lug (bluing not included) | Hourly Rate |
| Raising Dent in Barrel (bluing not included) | $150.00 |
| Straighten/Adjust Barrel | $95.00 |
| Polish Chamber Bore | $75.00 |
| Back Boring (per Barrel, non plated bore) | Hourly Rate |
| Open/Modify Choke | |
| Per Barrel or tube, non platedbores | $75.00 |
| Install Screw in Choke (plus Tubes) | |
| Win-choke ®, Colonial, etc. (non-plated bore) | $150.00 |
| Port Barrel -Per Barrel | $150.00 |
| Refitting Hinge | $250.00 |
Back to the Top
Muzzle Loader Work
| Pull Ball | Hourly Rate |
| Remove Broken Ramrod from Barrel | $100.00 |
Back to the Top
Handgun Work
| Chamfer Revolver Barrel | $50.00 |
| Chamfer Revolver Cylinder | $60.00 |
| Revolver Action Job | $120.00 |
| Re-Barrel Revolver | $100.00 |
| Straighten Crane on Revolver | $50.00 |
| Install Crane Lock | $50.00 |
| Remove/Modify Revolver Hammer Spur | $50.00 |
| Convert Revolver from Square to Round Butt | $100.00 |
| Semi-Automatic Pistol Action Job | $150.00 |
| Tighten Slide of 1911 Auto | $100.00 |
| Fit Barrel to 1911 Auto | |
| Non-Pampered Barrel | $115.00 |
| Ramped Barrel | 175.00 |
| Fit/Install Barrel Bushing on 1911 Auto | $50.00 +Bushing |
| Bevel Magazine of 1911 Auto | $65.00 |
| Checker Front Frame of 1911 Auto | $250.00 |
| Stipple Frame | $90.00 |
| Open/Modify Ejection Port 1911 Auto Slide | $65.00 |
| Throat, Polish Barrel and Feedramp 1911 Auto | $50.00 |
| Fit New Trigger to 1911 | $45.00 +Trigger |
| Custom Fit Hammer 1911 | $90.00 +Hammer |
| Cut Slide for Bo Mar w/o Sight | |
| Plain Cut | $150.00 |
| W/ Side Shields | $190.00 |
| Cut Slide for Dovetail Front Sight w/o Sight | $95.00 |
| Cut Slide for Novak Rear w/o Sight | $150.00 |
| Install Stake-On FRont w/o Sight | $60.00 |
| Flatten Slide Top & Serrate | $150.00 |
| Dehorn & Break Edges for Carry | $75.00 +Refinish |
| Modify 1911 Auto Frame for Beavertail Safety | $125.00 +safety/refinish |
| Install Auto Pistol Compensator | $350.00 |
Back to the Top
Stock Work
| Wood Refinishing (Does not include shaping) | |
| Restore painted Stock back to original finish | $375.00 |
| High Grade Guns | |
| Hand Rubbed London Finish | $375.00 |
| Hunter Finish | |
| Unfilled Oil or Lacquer finish - average stock | $150.00 |
| Same Finish - complicated stock | $175.00 |
| Gunsmith Finish | |
| Filled, Rubbed Oil finish - average stock | $210.00 |
| Same Finish - complicated stock | $275.00 |
| Spray Finish: Lacquer or Polyurethane | $285.00 |
| Recutting Checkering - Simple pattern | $120.00 |
| Recutting Checkering - Complicate Pattern | $170.00 |
| Glass Bedding Barrel & Action | |
| Hunting Rifle | $150.00 |
| Match Rifles, M-1 Garand, M1A, etc | $225.00 |
| Pillar Bed | $165.00 |
| Install Recoil Pad (labor only) | $75.00 |
| Install Adjustable Butt Plate (labor only) | $150.00 |
| Install Sling Swivels (Std and Q/D) | $55.00 |
| Install Stock Cross Bolt (refinish not incl.) | $75.00 |
| Install Recoil Reducer | |
| Simple installationin butt stock | $45.00 |
| Hydraulic butt plate-style (Gra-Coil, Counter Coil) | $125.00 |
| Drill stock and install Recoil Reducer | $95.00 |
| Inletting and Refinishing -semi-finished stock | |
| Does not includecheckering, recoil pad, buttplategripcap, or attachments | $650.00 |
| Fit Bed and Finish Fiberglass Stock Blank | $350.00 |
| PreFinished Synthetic Stock | |
| Fit and install barreled action | $120.00 |
| Camo Painting Stock | $125.00 |
| Install Adjustable Comb Hardware | $225.00 |
Back to the Top
|
Gunsmith Services 
